Sufficient Conditions for a Digraph to be Supereulerian

A (di)graph is supereulerian if it contains a spanning eulerian sub(di)graph. This property is a relaxation of hamiltonicity. Inspired by this analogy with hamiltonian cycles and by similar results in supereulerian graph theory, we analyze a number of sufficient Ore type conditions for a digraph to be supereulerian. Furthermore, we study the following conjecture due to Thomassé and the first author: if the arc‐connectivity of a digraph is not smaller than its independence number, then the digraph is supereulerian. As a support for this conjecture we prove it for digraphs that are semicomplete multipartite or quasitransitive and verify the analogous statement for undirected graphs.     

Investigation of unstable motion characteristics of vacuum arc cathode spots between transverse magnetic field contacts

With the improvement of the current level of power grids, the requirements of the opening level of the vacuum switches are also increasing. Vacuum arc cathode spots provide steam and electrons and, to a certain extent, determine the opening capacity of the vacuum switch. In this paper, a vacuum arc cathode spot research platform based on the de-mountable vacuum chamber is constructed. The characteristics of the vacuum arc cathode spots under the transverse magnetic field (TMF) contacts are assessed by a high-speed charge coupled device. The experimental results show that the cathode spot diffusion process can be divided into three processes through cathode spot distribution, arc voltage and current: initial diffusion stage of cathode spots, unstable motion stage of cathode spots, and extinguishing stage. The motion mode of cathode spots during unstable motion stage can be divided into cathode spots group stagnation (CSGS) to multi-cathode jet (MCJ) switch mode, cathode spots group motion (CSGM) to MCJ switch mode, CSGM mode, and MCJ mode. The effects of peak current and contact diameter on unstable motion mode were analysed.     

单斜ZnP2负极材料的锂化机理及性能

过渡金属磷化物电位低且比容量高, 是有发展前景的锂离子电池(LIBs)负极材料. 其中, ZnP₂属于双活性负极材料, Zn与P都能与Li⁺发生反应, 储Li⁺性能更具有竞争力. 但是, 对于ZnP₂的锂化机理及产物尚不明确. 采用第一性原理计算和电化学测试方法研究了ZnP₂的电子性质和电化学性能, 通过理论计算和实验测试相结合阐述了ZnP₂的锂化机制. 首先, 以密度泛函理论(DFT)计算揭示了ZnP₂的锂化机理、Li⁺扩散路径、势垒和理论比容量(1477 mAh/g). 其次, 通过直流电弧等离子体法及固相烧结法合成ZnP₂, 并测试其首圈放电曲线, 显示放电容量为1439 mAh/g, 与理论计算结果相近. 此外, 薄膜X射线衍射(XRD)检测最终产物成分为LiZn和Li₃P, 与DFT计算结果一致.     

Effects of anodic oxidation on corrosion properties of Al coating by arc spraying in seawater

A layer of Al coatings was prepared on the S355 steel by arc spraying, which was conducted by anodic oxidation treatment; the morphologies, chemical element compositions and phases of Al coating, and anodic oxide layer were analyzed with field emission scanning electron microscope (FESEM), energy dispersive spectrometer (EDS) and X‐ray diffraction (XRD), respectively. The corrosion protections of Al coating before and after anodic oxidation were discussed with a seawater immersion test; the corrosion resistance mechanisms of Al coating and anodic oxide layer in the seawater were also investigated. The results show that the thickness of Al coating is about 300 µm by arc spraying, the sample surfaces become loose after seawater immersion corrosion and Cl^? and O^2? penetrate into the substrate from the cracks, destroying the binding properties of coating–substrate, and the coating fails. After anodic oxidation, the oxide layer is formed in the surface of Al coating with the thickness of about 30 µm; the corrosion products are mainly composed of Al(OH)₃, which barraged the holes caused by seawater corrosion. The corrosion cracks are formed during the corrosion, while the number and depth of cracks decrease obviously after anodic oxidation treatment. The corrosion of Al coating becomes the local corrosion after anodic oxidation treatment, and the grains are smaller, which are easily nucleated to form a new corrosion resistance layer. Copyright © 2015 John Wiley & Sons, Ltd.     

Universal arcs in local tournaments

An arc $uv$ of a digraph $D$ is called universal if $uv$ and $w$ are in a common cycle for any vertex $w$ of $D$. In this paper we characterize local tournaments whose every arc is universal.     

NUMERICAL ANALYSIS OF ARC MOTION IN RAILGUN MUZZLE UNDER THE EFFECT OF BACKFLOW

在电磁轨道炮发射过程中,膛口外的高温气团以远高于声速的运动速度向内膛运动,这会使得膛口的电弧形态发生改变以及电弧位移。为了实现膛口电弧运动过程的数值计算,本文基于磁流体理论,引入了一种和电弧等离子体自身电导率密切相关的电位边界条件处理方法,建立了膛口位置电弧仿真模型。对回流效应下的电弧运动规律进行了分析,并且研究了运动过程中电弧对内膛流场的温度分布产生的影响。结果表明电弧的运动加剧了膛内温升。     

微分求积方法对于桩基大变形分析的应用

本文基于大变形的理论,采用弧坐标首先建立了具有初始位移的桩基的非线性数学模型,一组强非线性的微分-积分方程,其中,地基的抗力采用了Winkeler模型;其次,引入变数变换将微分-积分方程转化为一组非线性微分方程,并用微分求积方法离散了方程组,得到一组离散化的非线性代数方程;最后用Newton-Raphson迭代方法对离散化方程进行了求解,得到了桩基变形前后的构形、弯矩和剪力.计算中选取了两种不同类型的初始位移,并考察了它们对桩基大变形力学行为的影响.     

冲击速度和磨粒粒度对FeCrAl/WC复合涂层冲蚀性能的影响

采用粉芯丝材作为原料,利用高速电弧喷涂技术制备了具有良好抗高温冲蚀磨损性能的FeCrAl/WC复合涂层;考察了650℃下冲击速度和磨粒粒度对复合涂层高温冲蚀磨损性能的影响.结果表明,复合涂层和20G锅炉钢的耐高温冲蚀磨损能力随着磨粒粒度的增加而有所提高;30°攻角下冲蚀率随磨粒粒度的变化速率比90°攻角下的小;同20G锅炉钢相比,复合涂层对速更加敏感,速度越低,FeCrAl/WC复合涂层的抗冲蚀磨损性能越好.     

刃型位错和圆弧形刚性线夹杂的干涉效应

位错和夹杂的干涉效应对于理解材料的强化和韧化机理具有十分重要的意义。文中研究了晶体材料中刃型位错和多条共圆弧刚性线夹杂的干涉作用。利用Riemann—Schwarz反照原理和复势函数的奇性主部分析技术，得到了问题的一般解答；对于只含一条刚性线夹杂的情况，给出了复势函数的封闭形式解。由Peach-Koehler公式求出了作用在刃型位错上的位错力，并讨论了圆弧形刚性线夹杂对位错力的影响规律，发现弧形刚性线对刃型位错有很强的排斥作用。本文解答不但可作为格林函数获得任意分布位错的相应解答，而且可以用于研究刚性线夹杂和任意形状裂纹的干涉效应问题。